Harrows
Knowles 30', 34' and 38' Wheel Mounted Spring Tooth Harrows
| 2" x 2" Tooth Cross Bars. Size of Tooth-1-3/4" x 5/16"
x 39". Heavy Duty Tubular Tongue and Frame. Single Wing Support Tire on Each Wing.
Variable Length Tongue insert for Each Width. Dual 12.5L x 15 8-Ply Tires for Added
Flotation. Wing Sections are Easily Moved to 90 degrees for Transport. Depth Control
Levers. 23" Tooth Bar Spacing. Center Mounted Jack Stand. Heavy Duty Replaceable Front and
Rear Wear Shoes. Heat Treated Teeth with Holes for Replacement Points. Also, more features
and specifications.
|
|
Knowles Series SW 720 Wheel Mounted Spring Tooth Harrow
|
Sections raise hydraulically for easy trash removal and
backing up. Sections are easily moved to 90 degrees for transport. Heavy duty tubular
frame is reinforced at all stress points. Heavy wear shoes are provided for longer life.
Heat treated spring teeth resist wear and breakage. Size of tooth - 1-3/4" x
5/16" x 39". Teeth require 1/2" mounting bolts. 3/8" holes provided in
teeth for replacement points on 2" centers. Sections are joined together with 1"
diameter bolts. Jackstand for easier hitching is standard equipment. 15" wheels with
large flotation type tires are standard. A rugged adjustable hitch is provided to
fit tractor draw bar. 23" tooth bar spacing. Also, more features and
specifications.
|
Knowles Series H Spring Tooth Harrows 3-Point Hitch Pull Type
| This is an all new high quality, ruggedly designed harrow that will give many years of satisfactory service. It can be converted from a three-point hydraulic lift type to a trailing or a pull type machine by removing a tee handle pin. With this arrangement, two different requirements for spring tooth harrows can be met with a single model. Also, more features and specifications. |
|
.gif)
